SAMPLE AND SAMPLING TERMINOLOGY:Saves Cost, Labor, and Time

<< INTERVIEWING:The Role of the Interviewer, Terminating the Interview

PROBABILITY AND NON-PROBABILITY SAMPLING:Convenience Sampling >>

Research Methods STA630

Lesson 26

SAMPLE AND SAMPLING TERMINOLOGY

A sample is a subset, or some part, of a larger whole. A larger whole could be anything out which

sample is taken. That `whole' could be a bucket of water, a bag of sugar, a group of organizations, a

group of students, a group of customers, or a group mid-level managers in an organization. A complete

group of entities sharing some common set of characteristics is population. In other words, the totality

out of which sample is drawn is referred to as population.

Why sample?

1. Saves Cost, Labor, and Time

Applied research projects usually have budget and time constraints. Since sample can save financial cost

as well as time, therefore, to go for sample study is pragmatic.

Of course, a researcher investigating a population with an extremely small number of population

elements may elect to conduct a study on the total population rather than a sample because cost, labor,

and time constraints are relatively insignificant.

Although sample study cuts costs, reduces labor requirements, and gathers vital information quickly, yet

there could be other reasons.

2. Quality Management/supervision

Professional fieldworkers are a scarce commodity. In a large study rather than employing less qualified

staff it may be advisable to do a sample study and employ highly qualified professional fieldworkers. It

can certainly affect the quality of the study. At the same time it may be easier to manage a small group

and produce quality information. Supervision, record keeping, training, and so forth would all be more

difficult in a very large study.

3. Accurate and Reliable Results

Another major reason for sampling is that samples, if properly selected, are sufficiently accurate in most

of the cases. If the elements of a population are quite similar, only a small sample is necessary to

accurately portray the characteristics of interest. Most of us have had blood samples taken from the

finger, the arm, or another part of body. The assumption is that blood is sufficiently similar through out

the body, the characteristics of the blood can be determined on the basis of sample.

When the elements of population are highly homogenous, samples are highly representative of the

population. Under these circumstances almost any sample is as good as another.

Samples may be more accurate than census. In a census study of large population there is a greater

likelihood of non-sampling errors. In a survey mistakes may occur that are unrelated to the selection of

people in the study. For example, a response may be coded incorrectly, or the keyboard operator might

make data entry error. Interviewer mistakes, tabulation errors, and other non-sampling errors may

increase during census because of the increased volume of work. In sample increased accuracy is

possible because the fieldwork and tabulation of the data can be closely supervised than would be

possible in a census. In field survey, a small, well trained, closely supervised group may do a more

careful and accurate job of collecting information than a large group of nonprofessional interviewers

trying to contact everyone.

4. Sampling may be the Only Way

Many research projects, especially those in quality control testing, require the destruction of the items

being tested. If the manufacturer of firecrackers wished to find out whether each product met a specific

production standard, there would be no product left after testing. Similarly, consider the case of electric

Research Methods STA630

bulbs. In testing the life of bulbs, if we were to burn every bulb produced, there would be none left to

sell. This is destructive sampling.

5. Determine the Period of Study

Interviewing every element of a large population without sampling requires lot of time, may be a year or

more. In such a long period study, even the seasonal variation may influence the response pattern of the

respondents. For example, if the study was aimed at measuring the level of unemployment in a given

large city, the unemployment rate produced by the survey data would not refer to the city as of the

beginning of interviewing or as of the end. Researcher may be forced to attribute the unemployment to

some hypothetical date, representing to the midpoint of the study period. Hence it will be difficult to

determine the exact timing to which the data of the study pertains.

Sampling Terminology

There are a number of technical terms used in books on research and statistics which need explanation.

Some of the important terms are:

Element

An element is that unit about which information is collected and which provides the basis of analysis.

Typically, in survey research, elements are people or certain types of people. It is that unit about which

information is collected and that provides the basis of analysis. It can be a person, groups, families,

organizations, corporations, communities, and so forth.

Population

A population is the theoretically specified aggregation of study elements. It is translating the abstract

concept into workable concept. For example, let us look at the study of "college students."

Theoretically who are the college students? They might include students registered in government

colleges and/or private colleges, students of intermediate classes and/or graduate classes, students of

professional colleges and/or non-professional colleges, and many other variations. In this way the pool

of all available elements is population.

Target Population

Out of the conceptual variations what exactly the researcher wants to focus on. This may also be called

a target population. Target population is the complete group of specific population elements relevant to

the research project. Target population may also be called survey population i.e. that aggregation of

elements from which the survey sample is actually selected.

At the outset of the sampling process, it is vitally important to carefully define the target population so

the proper source from which the data are to collected can be identified. In our example of `college

students" finally we may decide to study the college students from government institutions located in

Lahore, who are studying social sciences, who are aged 19 years of age, and hailing from rural areas.

Sampling

The process of using a small number of items or parts of a larger population to make conclusions about

the whole population. It enables the researchers to estimate unknown characteristics of the population.

Sampling Frame

In actual practice the sample will be drawn from a list of population elements that is often different from

the target population that has been defined. A sampling frame is the list of elements from which the

Research Methods STA630

sample may be drawn. A simple example could be listing of all college students meeting the criteria of

target population and who are enrolled on the specified date.

A sampling frame is also called the working population because it provides the list that can be worked

with operationally. In our example, such a list could be prepared with help of the staff of the selected

colleges.

Sampling Frame Error

A sampling frame error occurs when certain sample elements are excluded or when the entire

population is not accurately represented in the sampling frame. The error that occurs when certain

sample elements are not listed or available and are not represented in the sampling frame.

Sampling Unit

A sampling unit is that element or set of elements considered for selection in some stage of sampling.

Sampling may be done in single stage or in multiple stages. In a simple, single-stage sample, the

sampling units are the same as the elements. In more complex samples, however, different levels of

sampling units may be employed. For example, a researcher may select a sample of Mohallahs in a

city, and then select a sample of households from the selected Mohallahs, and finally may select a

sample of adults from the selected households. The sampling units of these three stages of sampling are

respectively Mohallah, households, and adults, of which thee last of these are the elements. More

specifically, the terms "primary sampling units," "secondary sampling units," and "final sampling units"

would be used to designate the successive stages.

Observation Unit

An observation unit, or unit of data collection, is an element or aggregation of elements from which the

information is collected. Often the unit of analysis and unit of observation are the same the individual

person but this need not be the case. Thus the researcher may interview heads of household (the

observation units) to collect information about every member of the household (the unit of analysis).

Parameter

A parameter is the summary description of a given variable in a population. The mean income of all

families in a city and thee age distribution of the city's population are parameters. An important part

portion of survey research involves the estimation of population parameters on the basis of sample

observation.

Statistic

A statistic is the summary description of a given variable in a survey sample. Thus the mean income

computed from the survey sample and the age distribution of that sample are statistics. Sample statistics

are used to make estimates of the population parameters.

Sampling Error

Probability sampling methods seldom, if ever, provide statistics exactly equal to the parameters that they

are used to estimate. Probability theory, however, permits us to estimate the error to be expected for a

given sample (more information to be sought from professional in Statistics).

Table of Contents: